Why you Should Always Wear Protective Gloves When Doing Handyman Work

Doing typical handyman tasks will expose you to plenty of hazards. Some of them you can anticipate while others will often defy the ordinary nature of the work. That is why you cannot leave anything to chance. You must protect yourself from abrasive injuries, corrosive spills, cuts, nicks, and knocks as a well as a host of other precarious possibilities.

Your hands are obviously the ones which are most likely to get injured as you work as a handyman. This is why it is essential to wear protective gloves as you go about such tasks. The kind of gloves you need will depend on the sort of jobs you are doing and the probable risks.

Protect Against Ordinary Dirt

Even if there are no obvious hazards in the tasks you are about to do, it is important to protect your hands from the usual dirt. If this is the case, a pair of fabric gloves will often suffice. They are comfortable and may even offer protection against abrasive injuries.

Protect Against Abrasions

When there is risk for injuries sustained by abrasive action, you need to find gloves that are adequately tough. Some textile and cotton gloves will suffice for this especially if the risk is from wrenching kind of tools. For more protection against injury causing abrasions, you need tougher gloves. Gloves made from canvas material or leather are much more ideal for such challenges.

Protection Handling Corrosive and Staining Solvents or Liquids

Handymen are likely to handle or come across corrosive liquids and solvents as they work. There are other spillable substances which can stain the skin permanently, including paints and dyes. For such, rubber and plastic gloves are more effective.

Even apparently flimsy rubber gloves are resistant to acidic corrosion which would eat through much tougher leather and canvas gloves. To protect against corrosive industrial chemicals such as nitric acid, hydrochloric acid, sulfuric acid, and peroxides wear butyl rubber gloves. On the other hand, natural latex gloves are ideal for protection against water solutions including diluted acids, salts, alkalis, and ketones. For protection against natural solvents such as organic acids, alcohols, hydraulic fluid and gasoline, wear gloves made of neoprene.

Protection Against Scorching Heat, Scalds and Burns

If you are working in places like a kiln or with a boiler, the risk of burns and scalds is very real. Hot solids or liquids can do serious damage to your arms and hands. Just as well, if you are doing welding the risk or heat injuries is very real.

Some of the worst burn injuries in hospitals are as a result of burns sustained while using arc welding or oxy-acetylene flame welders. Aluminized protective gloves are ideal for providing such kind of protection. They are often must wear items for those working in foundries and furnaces. Nitrile rubber gloves are recommended for protecting your hands against chlorinated solvents such as laundry bleach.

Foolproof Industrial Grade Protection

If you want the most effective protection for your hands while working on handyman jobs, look for Kevlar reinforced gloves. Tough, robust and versatile, Kevlar gloves will protect your hands when there is serious risk of cuts and abrasions. They are also famously cold and heat resistant.

Choosing an adequate form of protection is essential for anyone working as a handyman. Your hands are the most at risk for these kinds of tasks. This is why donning the kind of gloves described above is the most effective way to avoid nasty injuries.